Install cards and fitment guides.
The install cards that ship with CMT handguards and receivers, written out with their torque values, and the Plan B guides for comparing flash comps and brakes, identifying muzzle thread pitches, choosing between Plan B and direct-thread HUB adapters, and peel-washer timing.
Install guides.

How to install a CMT handguard
Barrel nut 50 ft-lb, back off a half turn, final 50 to 70 ft-lb; clamp screws 55 in-lb; no timing. The in-box card, step by step.
Read install guide →
AR-15 receiver assembly notes
Standard AR-15 parts kit, the pre-installed bolt catch pin and tensioning screw, the ambi lower's extended detent, barrel nut limit.
Read assembly notes →
.308 combo set assembly notes
DPMS-pattern parts kit and magazines, the detent spring cut to .750 in., CMT-only fit, and the headspace check.
Read assembly notes →Plan B guides.

Plan B muzzle device guide
Learn how flash comps, brakes, Plan B and direct-thread HUB adapters, and timing hardware fit into a complete system.
Read guide →
Flash comp vs. muzzle brake
Compare unsuppressed roles, timing requirements, weights and the matching peel-washer sizes for brake installation.
Read comparison →
HUB, Plan B and direct thread
Compare a HUB-to-Plan-B mount with direct-thread HUB adapters for confirmed 1/2–28 or 5/8–24 barrel threads.
Read compatibility guide →
1/2–28 vs. 5/8–24
Review both pitches, matching direct-thread adapters and the corresponding 1/2-inch or 5/8-inch ID peel washers.
Read thread guide →Shop after you verify.
Once you have confirmed the correct muzzle thread, caliber, mounting path and timing hardware, compare the complete catalog of Plan B muzzle devices, HUB adapters and laminated-steel peel washers.
