
UPUR-1LH Left Hand Eject Billet Upper Receiver
Left-hand eject billet AR-15 upper receiver: 7075-T6, forward assist, no ejection port cover, machined in Tennessee. Not serialized, ships direct.
The UPUR-1LH is CMT's billet AR-15 upper receiver with the ejection port on the left side, for left-handed shooters who want brass thrown away from their face. It takes a left-hand bolt carrier group and a barrel with a left-hand barrel extension; the charging handle, forward assist parts, barrel nut, handguard and lower are standard AR-15.
Part no. CMT-UPUR-1LH
What goes with this upper.
An upper needs a lower under it, a bolt carrier group in it and a handguard on it. Ours are cut on the same machines, so they fit the first time.
- CMT parts for this build
- M16 Bolt Carrier Group — Complete, Nitride — Complete full-auto profile M16 bolt carrier group in nitride, staked gas key. 5.56 NATO / .223 Rem/ 300 BLK
- HDM 11.5 Rail — 11.5 in. free-float handguard for AR-15 uppers.
- TANO 13.0 Rail — 13.0 in. free-float handguard for AR-15 uppers.
- HDM-A2 15 ARCA Rail — 15.0 in. free-float ARCA-Swiss handguard for AR-15 uppers.
- J.A.G. .625 Low-Profile Gas Block — Low-profile .625 in. journal gas block for AR-15 and AR-10 barrels.
- J.A.G. .750 Low-Profile Gas Block — Low-profile .750 in. journal gas block for AR-15 and AR-10 barrels.
The UPUR-1LH left-hand eject billet upper receiver is machined from 7075-T6 billet aluminum and finished in black Type III hardcoat. The barrel extension bore and the receiver face are cut in the same setup, so the barrel seats square and the extension indexes without the witness-mark guesswork that comes with a receiver machined in two operations. The ejection port and bolt clearance are mirrored for a left-hand bolt carrier group.
Configuration
- Forward assist installed boss, machined
- No ejection port cover: the left-hand ejection port is left open, with no cover pin bosses
- Left-hand eject; requires a left-hand bolt carrier group and barrel extension
- Flat-top MIL-STD-1913 rail, T-marked
- Accepts any free-float handguard that uses a standard barrel-nut thread
What is not included
This is a stripped upper receiver. Barrel, bolt carrier group, charging handle and forward assist parts are sold separately. It is not a firearm and does not require a transfer.
Installation. Support the receiver in a vise block designed for uppers. Torque the barrel nut to the handguard manufacturer's value and confirm gas-tube alignment before firing.
| Platform | AR-15 |
|---|---|
| Receiver type | Stripped upper receiver |
| Serialized | No — ships direct to you |
| Top rail | Flat-top MIL-STD-1913, T-marked |
| Forward assist | Yes |
| Ejection port cover | None |
| Ejection | Left-hand |
| Charging | Rear |
| Material | 7075-T6 billet aluminum |
| Finish | Type III hardcoat anodize (MIL-A-8625 Type III, Class 2), black |
| Origin | Machined in Tennessee, USA |
Questions about this part
Does a left-hand upper need a special bolt carrier group?
Yes. The ejection port and the bolt clearance are mirrored, so the UPUR-1LH needs a left-hand bolt carrier group and a barrel with a left-hand barrel extension. A standard bolt carrier group ejects to the right, where this receiver has no port.
Does the UPUR-1LH fit a standard AR-15 lower?
Yes. It is a standard AR-15 upper apart from the ejection side, so it fits a mil-spec AR-15 lower, including CMT's UHP-15 and UHP-15A. It is a stripped upper: the barrel, bolt carrier group, charging handle and forward assist parts are sold separately, and it is not serialized, so it ships direct to you.
