Shop AR Receivers Combo Receiver Sets
Combo Receiver Sets

GEN 3 UHP15A Ambi Billet Combo Receiver Set

$469.99
Ships UPS flat rate $20.99Ships UPS to your dealer; faster UPS options at checkout.

Ambidextrous GEN 3 UHP15A lower matched to a UPUR-1 upper. Ambi mag release runs on mil-spec internals. Ships to your FFL.

Ships to your FFL. This is a serialized receiver. At checkout you'll enter the receiving dealer's FFL, and we ship to them after the license is confirmed.

Limit 2 per order.

Install guide. Gen 3 UHP15A ambi lower and UPUR-1 assembly notes: standard AR-15 lower parts kit, but build it with the extended bolt catch detent from the bag on the trigger guard, not the kit's; the pre-installed bolt catch pin and tensioning screw; barrel nut 70 ft-lb at most.
In stock
My cart

Part no. CMT-UHP15A-COMBO-G3

Build it out

What goes with this receiver set.

The receivers are matched; the build still needs a handguard and a bolt carrier group. Five rails that fit this set, in three series, and our nitrided M16 BCG.

The ambidextrous version of the GEN 3 set: bolt catch and magazine release on both sides, nitrided and aggressively textured so they work with gloves and wet hands.

The ambi magazine release runs on standard mil-spec internals. That matters more than it sounds. Most ambi lowers want a proprietary catch, spring or button, which is fine until one walks off the bench two states from home. This one takes the part any shop has in a drawer.

The lower

  • Machined from 7075-T6 billet on five-axis CNC equipment
  • Type III hardcoat anodize (MIL-A-8625 Type III, Class 2)
  • Wire-EDM magazine well profile, flared for fast reloads
  • Integrally machined trigger guard — nothing to snap off
  • Mil-spec .154 in. trigger and hammer pin holes
  • Reinforced buffer tube boss
  • Lifetime warranty against manufacturing defects
  • Ambidextrous bolt catch and magazine release, black nitrided
  • Multi-caliber markings

The upper

  • UPUR-1 billet upper, precision five-axis machined from 7075-T6
  • Machined to the same tolerances as the lower it is paired with
  • Type III hardcoat anodize (MIL-A-8625 Type III, Class 2)

Custom laser engraving is available, including SBR or trust information to ATF specification.

What is not included. A receiver set is a foundation, not a rifle. You still need a barrel, a bolt carrier group, upper and lower parts kits, and a stock or brace assembly to finish the build.

This is a serialized firearm receiver. It ships to a licensed dealer for transfer, not to your door. You must be 21 or older. Give us your dealer's information at checkout, or we will ask for it before the order ships.

PlatformAR-15
Part typeCombo receiver set, upper and lower
SerializedYes — the whole set ships to a licensed dealer
ControlsAmbidextrous bolt catch and magazine release, black nitrided
Material7075-T6 billet aluminum
FinishType III hardcoat anodize (MIL-A-8625 Type III, Class 2)
OriginMachined in Tennessee, USA
LowerGEN 3 UHP15A ambidextrous billet
UpperUPUR-1 billet
Magazine releaseRuns on standard mil-spec internals
MarkingsMulti-caliber
Customer experience

Reviews

— ☆☆☆☆☆ Loading reviews…
Loading reviews…

Write a review

If you bought this part from us, your review publishes straight away. Otherwise we read it first. Your email address is never shown.