
BLEM UPUR-1LH Left Hand Eject Billet Upper Receiver
Blemished — cosmetic marks only, final sale. Billet AR-15 upper receiver, left-hand eject. Forward assist. No ejection port cover. Not serialized — ships direct to you.
Part no. CMT-UPUR-1LH-BLEM
What goes with this upper.
An upper needs a lower under it, a bolt carrier group in it and a handguard on it. Ours are cut on the same machines, so they fit the first time.
- CMT parts for this build
- M16 Bolt Carrier Group — Complete, Nitride — Complete full-auto profile M16 bolt carrier group in nitride, staked gas key. 5.56 NATO / .223 Rem/ 300 BLK
- HDM 13.0 Rail — 13.0 in. free-float handguard for AR-15 uppers.
- TANO 13.0 Rail — 13.0 in. free-float handguard for AR-15 uppers.
- HDM-A2 15 ARCA Rail — 15.0 in. free-float ARCA-Swiss handguard for AR-15 uppers.
- J.A.G. .625 Low-Profile Gas Block — Low-profile .625 in. journal gas block for AR-15 and AR-10 barrels.
- J.A.G. .750 Low-Profile Gas Block — Low-profile .750 in. journal gas block for AR-15 and AR-10 barrels.
Blemished. This part left the line with a cosmetic defect — an anodizing shade variance, a handling mark, or a light machining witness. It is dimensionally in spec and functionally identical to the first-quality part. We do not photograph each one, so the specific mark on the unit you receive is not shown above.
Blems are final sale: no returns and no exchanges for cosmetic reasons, because cosmetics are precisely what you are accepting a discount on. Manufacturing defects are still covered by the normal warranty.
The UPUR-1LH left-hand eject billet upper receiver (blemished) is machined from 7075-T6 billet aluminum and finished in black Type III hardcoat. The barrel extension bore and the receiver face are cut in the same setup, so the barrel seats square and the extension indexes without the witness-mark guesswork that comes with a receiver machined in two operations. The ejection port and bolt clearance are mirrored for a left-hand bolt carrier group.
Configuration
- Forward assist installed boss, machined
- No ejection port cover: the left-hand ejection port is left open, with no cover pin bosses
- Left-hand eject; requires a left-hand bolt carrier group and barrel extension
- Flat-top MIL-STD-1913 rail, T-marked
- Accepts any free-float handguard that uses a standard barrel-nut thread
What is not included
This is a stripped upper receiver. Barrel, bolt carrier group, charging handle and forward assist parts are sold separately. It is not a firearm and does not require a transfer.
Installation. Support the receiver in a vise block designed for uppers. Torque the barrel nut to the handguard manufacturer's value and confirm gas-tube alignment before firing.
| Condition | Blemished — cosmetic only, final sale |
|---|---|
| Platform | AR-15 |
| Receiver type | Stripped upper receiver |
| Serialized | No — ships direct to you |
| Top rail | Flat-top MIL-STD-1913, T-marked |
| Forward assist | Yes |
| Ejection port cover | None |
| Ejection | Left-hand |
| Charging | Rear |
| Material | 7075-T6 billet aluminum |
| Finish | Type III hardcoat anodize (MIL-A-8625 Type III, Class 2), black |
| Origin | Machined in Tennessee, USA |
