
BLEM TANO 11.5 Rail
Blemished — cosmetic marks only, final sale. 11.5 in. TANO free-float M-LOK handguard in the Tanodized hardcoat.
Limit 2 per order.
Part no. CMT-TANO-115-BLEM
What goes with this rail.
This rail mounts to a mil-spec AR-15 upper with our barrel nut, no timing. If the receivers are still to buy, these are the sets we cut and finish together.
- CMT parts for this build
- TANO GEN 3 UHP-15A Ambi Billet Combo Receiver Set — Matched GEN 3 UHP-15A ambidextrous lower and UPUR upper, cut and finished together in CMT's Tanodized hardcoat.
- AR-15 Billet Combo Receiver Set — Matched GEN 3 UHP-15 lower and UPUR-1 upper, both 7075-T6 billet.
- GEN 3 UHP15A Ambi Billet Combo Receiver Set — Ambidextrous GEN 3 UHP15A lower matched to a UPUR-1 upper.
- J.A.G. .625 Low-Profile Gas Block — Low-profile .625 in. journal gas block for AR-15 and AR-10 barrels.
- J.A.G. .750 Low-Profile Gas Block — Low-profile .750 in. journal gas block for AR-15 and AR-10 barrels.
Blemished. This part left the line with a cosmetic defect — an anodizing shade variance, a handling mark, or a light machining witness. It is dimensionally in spec and functionally identical to the first-quality part. We do not photograph each one, so the specific mark on the unit you receive is not shown above.
Blems are final sale: no returns and no exchanges for cosmetic reasons, because cosmetics are precisely what you are accepting a discount on. Manufacturing defects are still covered by the normal warranty.
The TANO 11.5 Rail is a free-float TANO handguard machined from 6061 extruded aluminum. It carries a continuous MIL-STD-1913 top rail that indexes flush with a flat-top upper, and M-LOK on every flat below it.
CMT's barrel nut does not have to be timed. There is no shim stack to chase and no clocking the nut to clear the gas tube.
Fitment
- Mil-spec AR-15 flat-top upper receiver
- Intended for a 11.5–14.5 in. barrel
- Clears low-profile gas blocks up to .750 in. journal diameter
| Condition | Blemished — cosmetic only, final sale |
|---|---|
| Platform | AR-15 |
| Rail length | 11.5 in. |
| Series | TANO |
| Attachment | M-LOK |
| Top rail | Continuous MIL-STD-1913 |
| Barrel nut | CMT proprietary — no timing, no shims |
| Gas block clearance | Low-profile, up to .750 in. |
| Material | 6061 extruded aluminum |
| Finish | Type III hardcoat anodize (MIL-A-8625 Type III, Class 2), Tanodized earth tone — shade varies by batch |
| Origin | Machined in Tennessee, USA |
