HUB Mount Adapterthe suppressor-side half of the Plan B system; 1.375–24 HUB thread.$59.99
Plan B Radial Brake 1/2–28
1/2–28 Plan B radial brake for .224 and smaller, and 6mm ARC. Ports all the way around, so no timing. 4150 CMV steel, QPQ nitride, made by CMT in America.
The Plan B Radial Brake is a muzzle brake with ports drilled all the way around, cut for a 1/2–28 barrel thread and rated for .224 calibre and smaller, and for 6mm ARC. It reduces felt recoil by venting gas outward in every direction, needs no timing or peel washer, and doubles as the barrel-side mount for a Plan B suppressor mount.
Part no. PB-RB-1228
Plan B system: what goes with this part.
The Radial Brake 1/2–28 is the barrel-side half of the Plan B system. To complete the setup, add the HUB Mount Adapter to your suppressor.
HUB Mount Adapterthe suppressor-side half of the Plan B system; 1.375–24 HUB thread.$59.99- Optional accessories and replacement hardware
- Thread Protector — optional: covers the muzzle device when the suppressor is off.
Plan B parts are also sold at planbmuzzledevices.com, the Plan B Muzzle Devices store, with the full line and its fitment guides.
A radial muzzle brake cut for a 1/2–28 right-hand barrel thread and rated for .224 calibre and smaller, and for 6mm ARC. Machined by CMT from 4150 CMV steel and QPQ nitrided. It works as a brake on its own and as the mounting interface for a Plan B suppressor mount.
What a radial brake does
A radial muzzle brake has ports drilled all the way around its body instead of only on the sides. When the bullet leaves the barrel, the gas behind it escapes outward through those ports rather than straight ahead, and that takes away part of the rearward push you feel as recoil. Because the gas leaves evenly around the full circle, the forces cancel each other and the muzzle is not pushed up, down or to either side.
Timing is not required. The port pattern is the same all the way around, so there is no top or bottom to line up and no peel washer stack to build. Thread it on and torque it.
A brake is loud to the sides. A radial brake sends gas in every direction, including down, so expect more blast for anyone beside the shooter and some dust when shooting prone on loose ground. If you shoot next to other people regularly, a flash comp is the more considerate choice.
Verify every interface before you buy. Thread pitch, muzzle-device geometry, suppressor bore and mount depth all have to agree. "HUB compatible" is not blanket approval — confirm the exact suppressor model against its manufacturer's current drawings. Installed, fired or modified products cannot be returned.
| Thread pitch | 1/2–28 RH |
|---|---|
| Timing | Not required |
| Caliber rating | .224 or smaller, and 6mm ARC |
| Overall length | 1.730 in. |
| Weight | 2.4 oz. |
| Material | 4150 CMV steel |
| Finish | QPQ nitride |
| Origin | Made in America |
Questions about this part
What does a radial muzzle brake do?
A radial muzzle brake has ports all the way around its body. As the bullet leaves, gas escapes outward through those ports instead of straight ahead, which reduces the recoil you feel. Because the gas leaves evenly around the full circle, the muzzle is not pushed up, down or to either side.
Does the Plan B Radial Brake need to be timed?
No. The port pattern is the same all the way around, so there is no top or bottom to line up and no peel washer or crush washer stack to build. Thread it onto the barrel and torque it.
What calibre is the 1/2–28 Plan B Radial Brake for?
It is rated for .224 calibre and smaller, and for 6mm ARC, on a 1/2–28 right-hand barrel thread. For a 6mm ARC barrel threaded 5/8–24, use the 5/8–24 Plan B Radial Brake.
